Short answer: a standard 20 ft or 40 ft dry container has about 2,352 mm (7 ft 8⅝ in) of inside width and about 2,393 mm (7 ft 10¼ in) of inside height, so shelving on both side walls has to leave a working aisle between them. Brackets either hook or clamp onto the container structure with no drilling, or are bolted or welded in place. The load a shelf can carry depends on the bracket design, the deck and how the load is spread, so get it rated in writing and tested to your own requirement.
Last updated: November 18, 2026.
This guide is for container conversion companies, mobile workshop builders, storage operators and their distributors. For the product itself, see our container shelving brackets.
Inside dimensions of 20 ft and 40 ft containers
Start the layout from the inside of the box, not the outside. The table shows nominal figures for wooden-floor general purpose containers from the Hapag-Lloyd container specification:
| Dimension | 20 ft general purpose | 40 ft general purpose | 40 ft high cube |
|---|---|---|---|
| Inside length | 5,900 mm (19 ft 4¼ in) | 12,032 mm (39 ft 5⅝ in) | 12,032 mm (39 ft 5⅝ in) |
| Inside width | 2,352 mm (7 ft 8⅝ in) | 2,352 mm (7 ft 8⅝ in) | 2,342 mm (7 ft 8½ in) |
| Inside height | 2,393 mm (7 ft 10¼ in) | 2,395 mm (7 ft 10¼ in) | 2,700 mm (8 ft 10¼ in) |
| Door opening width | 2,340 mm (7 ft 8⅛ in) | 2,340 mm (7 ft 8⅛ in) | 2,340 mm (7 ft 8⅛ in) |
| Door opening height | 2,292 mm (7 ft 6¼ in) | 2,292 mm (7 ft 6¼ in) | 2,597 mm (8 ft 6¼ in) |
| Capacity | 33.2 m³ | 67.7 m³ | 76.3 m³ |
Hapag-Lloyd notes these are nominal and may differ through production tolerances. ISO 668:2020 classifies containers by external dimensions and sets only minimum internal dimensions for certain types, so boxes from different owners differ slightly. Measure the actual container, including lashing rings and vents, before fixing bracket heights or deck lengths.
How brackets fit the corrugated side walls
General purpose containers are steel boxes with corrugated walls. Hapag-Lloyd lists 10 lashing rings on each top longitudinal rail and lashing devices on the top and bottom rails and corner posts. Wall-mounted shelving should bear on that structure, not the flat wall sheet. Container seller Conexwest describes four common approaches:
| Method | How it fits | Trade-offs |
|---|---|---|
| Hook-on or clamp-on bracket | Hooks or clips into the factory lashing rings or rail, no drilling or welding | Reversible and quick to fit; positions follow the ring spacing of that container |
| Through-bolted bracket | Bolted through the wall with backing plates inside to spread the clamping force | Free positioning; drilled holes need sealing against water |
| Welded cleats or decks | Welded to the frame, usually corner posts or door-end rails | Permanent; Conexwest notes welding cannot be undone without cutting steel and hurts resale value |
| Freestanding racking | Stands on the floor, no wall fixing | Reversible; base plates are needed so rack feet do not crush the plywood floor |
Conexwest also advises fixing only to corrugation peaks or corner posts, not the flat valleys of the wall, which have little pull-out strength. Hapag-Lloyd gives a permissible load of 1,000 kg (2,205 lb) for each lashing device; that figure is for securing cargo, not a shelf rating, and you should not treat it as one.
Shelf decks and spans
Brackets carry the load; the deck spreads it between them. Two deck types are common:
- Timber boards or plywood: easy to cut on site. Conexwest notes timber decks suit light, dry storage, because containers can trap condensation against the walls.
- Steel decking: formed sheet or grating panels made by laser cutting and brake pressing. More rigid for heavy parts.
Span, deck thickness and edge return all change deflection, so design deck and bracket together. Conexwest also recommends an air gap behind the shelving and ventilation or a dehumidifier for moisture-sensitive contents.
Load planning without guesswork
There is no single load rating for container shelving. The safe load depends on the bracket, the attachment method, the number of brackets per deck, deck stiffness and whether the load is even or concentrated. Plan it in this order:
- List what goes on each shelf: weight, footprint and whether it is a point load or an even load.
- Decide whether shelves stay loaded while the container is moved; a mobile workshop sees road loads a static store does not.
- Choose the attachment method and bracket pitch, then the deck that spans that pitch.
- Ask the manufacturer for a rated load per bracket and per shelf in writing, set by design and confirmed by testing to your requirement, for example a proof load held for a set time with a deflection limit.
- Check the container side: its floor rating and maximum payload. Hapag-Lloyd lists a maximum payload of 30,200 kg for its 20 ft and 28,800 kg for its 40 ft wooden-floor boxes; your contents, shelving and fit-out all count toward it.
- Label each shelf with its working load.
Worked example: aisle width in a 20 ft container
A 20 ft box has 2,352 mm of inside width. Conexwest gives 600 mm as a common shelf depth and 3 ft (914 mm) as a minimum aisle, or 4 ft (1,219 mm) or more for a pallet jack.
- Shelves on both walls at 600 mm: 2,352 − 1,200 = 1,152 mm aisle. That passes the 914 mm minimum but is too narrow for a pallet jack.
- Shelves on one wall only at 600 mm: 2,352 − 600 = 1,752 mm, enough for a pallet jack on the open side.
- Height: 2,393 mm inside. A 4-tier frame 82 in (2,083 mm) high leaves about 310 mm above the top shelf; check this against any roof bows or lights before ordering.
What to put in your specification
- Container type, measured inside dimensions and lashing ring positions.
- Attachment method: hook-on, clamp, bolt or weld.
- Bracket height, number of tiers, shelf depth and deck type.
- Rated load per shelf and the test method, proof load and deflection limit you will accept.
- Material and finish: powder coat color, or galvanizing for damp or coastal sites. Our post on powder coating in metal fabrication covers the basics.
- Inspection and test documents, as described in our guide to quality documents from a metal fabrication supplier.
Container shelving brackets from HD Mechanical
HD Mechanical Vietnam makes steel container shelving brackets that hook onto the container wall, so shelves need no drilling or welding. The live product page lists a 21 in width and heights of 16, 35, 59 or 82 in for 1 to 4 tiers, with dimensions and tier counts customizable. Shelves are timber boards or steel decking cut to your depth. Finishes include powder coating, matte black or custom finishes, with options for logo engraving, labeling and retail packaging. Load ratings are set by the design you approve and tested to your requirement, and samples are available on request. See also metal furniture solutions.
Frequently asked questions
What are the inside dimensions of a 20 ft shipping container?
About 5,900 mm long, 2,352 mm wide and 2,393 mm high for a Hapag-Lloyd 20 ft general purpose container. These are nominal figures, so measure the actual box before fixing shelf positions.
Can you put shelves in a container without drilling?
Yes. Hook-on or clamp-on brackets hang from the lashing rings or rails, and freestanding racks stand on the floor, so neither needs drilling or welding.
How much weight can container shelving brackets hold?
It depends on the bracket design, the attachment method, the deck and how the load is spread. Ask for a rated load per bracket and per shelf in writing, confirmed by testing to your requirement.
Can I hang shelves from the lashing rings?
Many hook-on brackets do use them. The lashing ring rating is for securing cargo, so the shelf system still needs its own rated load.
Is a 40 ft high cube better for shelving than a standard 40 ft?
It gives more height. Hapag-Lloyd lists 2,700 mm inside height for its 40 ft high cube against 2,395 mm for its standard 40 ft, which can allow an extra tier or more clearance.
Sources
- Container Specification – Hapag-Lloyd
- ISO 668:2020 Series 1 freight containers – Classification, dimensions and ratings – ISO
- Container Shelving, Anchors and Pre-Fit Checklist – Conexwest
Request a container shelving bracket quote
Send your container type, measured dimensions, shelf layout and load requirement through our container shelving brackets page, the contact page or WhatsApp +84 98 878 53 93.

